ResMed Airsense 10 Elite TRI

• Advanced event detection identifies central sleep apnea, respiratory effort related arousal and Cheyne-Stokes respiration events to provide treating physicians valuable insight into the continued health of your patients.
• AutoRamp™ with sleep onset detection delivers a low pressure to help patients fall asleep with ease. Once the patient is asleep, it comfortably ramps up the pressure to the prescribed level.
• The quiet Easy-Breathe motor makes for a peaceful environment for the patient and their bed partner.
• Expiratory pressure relief (EPR™) maintains the optimal treatment for the patient during inhalation and reduces pressure during exhalation.
• SmartStart™ allows the patient to start therapy by breathing in, instead of pressing the ‘Start’ button.
• AutoSet Response comfort setting offers gentler pressure increases and a smoother night’s sleep to help patients with high pressure intolerance.
• Pulse oximetry monitoring is available.
• Integrated humidification simplifies setting up the device and makes therapy easier for your patients.
• Using AirView™, you can access nightly therapy data, troubleshoot remotely (using the remote assist feature) and change device settings remotely.
• The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings.
• Built-in ambient light sensor adjusts brightness of the screen based on the light in the room and turns off automatically.

AirSense 10 Elite Tripack - 3G
The ResMed AirSense 10 Elite is a premium fixed-pressure device with integrated humidifier, cellular connectivity and advanced event detection.
            
Connectivity comes standard
With each AirSense 10 device offering built-in cellular technology, you get unprecedented access to therapy data and remote access to device settings, helping you to be more connected with your patients and even more efficient in your business.

Advanced event detection
The AirSense 10 Elite includes central sleep apnea (CSA), respiratory effort related arousal (RERA) and Cheyne-Stokes respiration (CSR) detection to provide treating physicians valuable insight into the continued health of your patients.The algorithm has been designed to provide data to assist the physician in identifying indications of CSA, RERA and CSR, which you can monitor through AirView, to quickly and accurately provide patients with information to seek the right treatment.

OTHER FEATURES

AutoRamp™ with sleep onset detection delivers a  low pressure to help patients fall asleep with ease. Once the patient is asleep, it comfortably ramps up the pressure to the prescribed level.

The quiet Easy-Breathe motor makes for a peaceful environment for the patient and their bed partner.

Expiratory pressure relief (EPR™) maintains the optimal treatment for the patient during inhalation and reduces pressure during exhalation.

SmartStart™ allows the patient to start therapy by breathing in, instead of pressing the 'Start' button.
Pulse oximetry monitoring is available.

Integrated humidification simplifies setting up the device and makes therapy easier for your patients.
Using AirView™, you can access nightly therapy data, troubleshoot remotely (using the remote assist feature) and change device settings remotely.

The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings.

Built-in ambient light sensor adjusts brightness of the screen based on the light in the room and turns off automatically.

SPECIFICATIONS

Height 116 mm
Weight 1248 gm
Breadth 255 mm
Length 150 mm
Pressure measurement tolerance ±[0.5 cm H20 (0.5 hPa) + 4% of measured value]
Flow measurement tolerance ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
Peak power consumption 104W (108VA)
Operating pressure range 4 to 20 cm H2O
Supplemental oxygen Maximum flow 4 L/min
Power supply unit 90W power supply unit
Storage and transport humidity 5 to 95% relative humidity, non-condensing
Storage and transport temperature -4°F to +140°F (-20°C to +60°C)
Operating humidity 10 to 95% relative humidity, non-condensing
Housing construction Flame retardant engineering thermoplastic
Water capacity: To maximum fill line 380 mL
Air outlet 22 mm (complies with ISO 5356-1:2004)
Typical power consumption 53W (57VA)
Sensors Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
Operating altitude Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
Operating temperature +41°F to +95°F (+5°C to +35°C)
Maximum single fault steady state pressure Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
Modes CPAP

AirSense 10 Elite Tripack - 3G
The ResMed AirSense 10 Elite is a premium fixed-pressure device with integrated humidifier, cellular connectivity and advanced event detection.
            
Connectivity comes standard
With each AirSense 10 device offering built-in cellular technology, you get unprecedented access to therapy data and remote access to device settings, helping you to be more connected with your patients and even more efficient in your business.

OTHER FEATURES

AutoRamp™ with sleep onset detection delivers a  low pressure to help patients fall asleep with ease. Once the patient is asleep, it comfortably ramps up the pressure to the prescribed level.

The quiet Easy-Breathe motor makes for a peaceful environment for the patient and their bed partner.

Expiratory pressure relief (EPR™) maintains the optimal treatment for the patient during inhalation and reduces pressure during exhalation.

SmartStart™ allows the patient to start therapy by breathing in, instead of pressing the 'Start' button.
Pulse oximetry monitoring is available.

Integrated humidification simplifies setting up the device and makes therapy easier for your patients.
Using AirView™, you can access nightly therapy data, troubleshoot remotely (using the remote assist feature) and change device settings remotely.

The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings.

Built-in ambient light sensor adjusts brightness of the screen based on the light in the room and turns off automatically.

SPECIFICATIONS

Height 116 mm
Weight 1248 gm
Breadth 255 mm
Length 150 mm
Pressure measurement tolerance ±[0.5 cm H20 (0.5 hPa) + 4% of measured value]
Flow measurement tolerance ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
Peak power consumption 104W (108VA)
Operating pressure range 4 to 20 cm H2O
Supplemental oxygen Maximum flow 4 L/min
Power supply unit 90W power supply unit
Storage and transport humidity 5 to 95% relative humidity, non-condensing
Storage and transport temperature -4°F to +140°F (-20°C to +60°C)
Operating humidity 10 to 95% relative humidity, non-condensing
Housing construction Flame retardant engineering thermoplastic
Water capacity: To maximum fill line 380 mL
Air outlet 22 mm (complies with ISO 5356-1:2004)
Typical power consumption 53W (57VA)
Sensors Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
Operating altitude Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
Operating temperature +41°F to +95°F (+5°C to +35°C)
Maximum single fault steady state pressure Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
Modes CPAP

WARRANTY : 2 Years